Coding Ahead
CasePilot
Medical Coding Assistant
Case2Code
Search and Code Lookup Tool
RedactPHI
HIPAA-Compliant PHI Redaction
DetectICD10CM
ICD-10-CM Code Detection
Log in Register free account
1 code page views remaining. Guest accounts are limited to 1 page view. Register free account to get 5 more views.
Log in Register free account

Official Description

Insertion of wire or pin with application of skeletal traction, including removal (separate procedure)

© Copyright 2025 American Medical Association. All rights reserved.

Common Language Description

The CPT® Code 20650 refers to the procedure involving the insertion of a wire or pin, specifically a Steinmann pin, with the application of skeletal traction. This procedure is performed to stabilize a fracture by providing a means of traction that helps align the bone fragments. The Steinmann pin is inserted through the bone, allowing it to protrude from both sides, which facilitates the attachment of a weighted device. This device is crucial for maintaining the necessary tension and stabilization of the fracture site until a more definitive treatment, such as surgical intervention, can be undertaken. Importantly, this code encompasses not only the insertion of the pin and the application of the traction device but also the removal of both the pin and the traction apparatus, classifying it as a separate procedure. This comprehensive approach ensures that all aspects of the skeletal traction process are accounted for within the coding framework.

© Copyright 2025 Coding Ahead. All rights reserved.

1. Indications

The procedure associated with CPT® Code 20650 is indicated for specific conditions that require stabilization of a fracture through skeletal traction. The following are the explicitly provided indications for this procedure:

  • Fractures that require stabilization to promote proper healing and alignment.
  • Dislocations where skeletal traction may assist in realigning the bone structure.
  • Severe soft tissue injuries that necessitate immobilization and stabilization of the affected area.

2. Procedure

The procedure for CPT® Code 20650 involves several critical steps to ensure effective stabilization of the fracture through skeletal traction. Each step is detailed as follows:

  • Step 1: Preparation The patient is positioned appropriately to allow access to the affected limb. The area around the fracture site is cleaned and sterilized to minimize the risk of infection during the procedure.
  • Step 2: Insertion of the Steinmann Pin A Steinmann pin is carefully inserted through the bone at the fracture site. The pin is designed to protrude from both sides of the bone, providing a stable anchor point for the traction device. The insertion is performed using a specialized technique to ensure proper placement and minimize trauma to surrounding tissues.
  • Step 3: Application of Skeletal Traction Once the pin is securely in place, a weighted device is attached to the pin. This device applies a controlled amount of traction to the bone, helping to align the fracture fragments and stabilize the injury. The amount of weight used is determined based on the specific needs of the fracture and the patient's condition.
  • Step 4: Monitoring After the application of skeletal traction, the patient is monitored for any signs of complications, such as infection or improper alignment. Adjustments to the traction may be made as necessary to ensure optimal stabilization.
  • Step 5: Removal of the Pin and Traction Device Once the fracture has stabilized and the physician determines that a more permanent solution can be implemented, the Steinmann pin and the skeletal traction device are removed. This step is included in the procedure code, emphasizing the comprehensive nature of the treatment.

3. Post-Procedure

Post-procedure care following the application of skeletal traction involves monitoring the patient for any complications and ensuring proper healing of the fracture. Patients may require follow-up visits to assess the alignment and stability of the fracture site. Pain management strategies may be implemented to address any discomfort associated with the procedure. Additionally, rehabilitation may be recommended to restore function and strength to the affected limb once the skeletal traction is removed and the fracture has adequately healed.

Short Descr INSERT AND REMOVE BONE PIN
Medium Descr INSERTION WIRE/PIN W/APPL SKELETAL TRACTION SPX
Long Descr Insertion of wire or pin with application of skeletal traction, including removal (separate procedure)
Status Code Active Code
Global Days 010 - Minor Procedure
PC/TC Indicator (26, TC) 0 - Physician Service Code
Multiple Procedures (51) 2 - Standard payment adjustment rules for multiple procedures apply.
Bilateral Surgery (50) 0 - 150% payment adjustment for bilateral procedures does NOT apply.
Physician Supervisions 09 - Concept does not apply.
Assistant Surgeon (80, 82) 1 - Statutory payment restriction for assistants at surgery applies to this procedure...
Co-Surgeons (62) 1 - Co-surgeons could be paid, though supporting documentation is required...
Team Surgery (66) 0 - Team surgeons not permitted for this procedure.
Diagnostic Imaging Family 99 - Concept Does Not Apply
APC Status Indicator Hospital Part B services paid through a comprehensive APC
ASC Payment Indicator Non office-based surgical procedure added in CY 2008 or later; payment based on OPPS relative payment weight.
Type of Service (TOS) 2 - Surgery
Berenson-Eggers TOS (BETOS) P5B - Ambulatory procedures - musculoskeletal
MUE 4
CCS Clinical Classification 214 - Traction, splints, and other wound care
51 Multiple procedures: when multiple procedures, other than e/m services, physical medicine and rehabilitation services or provision of supplies (eg, vaccines), are performed at the same session by the same individual, the primary procedure or service may be reported as listed. the additional procedure(s) or service(s) may be identified by appending modifier 51 to the additional procedure or service code(s). note: this modifier should not be appended to designated "add-on" codes (see appendix d).
59 Distinct procedural service: under certain circumstances, it may be necessary to indicate that a procedure or service was distinct or independent from other non-e/m services performed on the same day. modifier 59 is used to identify procedures/services, other than e/m services, that are not normally reported together, but are appropriate under the circumstances. documentation must support a different session, different procedure or surgery, different site or organ system, separate incision/excision, separate lesion, or separate injury (or area of injury in extensive injuries) not ordinarily encountered or performed on the same day by the same individual. however, when another already established modifier is appropriate it should be used rather than modifier 59. only if no more descriptive modifier is available, and the use of modifier 59 best explains the circumstances, should modifier 59 be used. note: modifier 59 should not be appended to an e/m service. to report a separate and distinct e/m service with a non-e/m service performed on the same date, see modifier 25.
GC This service has been performed in part by a resident under the direction of a teaching physician
XE Separate encounter, a service that is distinct because it occurred during a separate encounter
RT Right side (used to identify procedures performed on the right side of the body)
AS Physician assistant, nurse practitioner, or clinical nurse specialist services for assistant at surgery
LT Left side (used to identify procedures performed on the left side of the body)
XS Separate structure, a service that is distinct because it was performed on a separate organ/structure
22 Increased procedural services: when the work required to provide a service is substantially greater than typically required, it may be identified by adding modifier 22 to the usual procedure code. documentation must support the substantial additional work and the reason for the additional work (ie, increased intensity, time, technical difficulty of procedure, severity of patient's condition, physical and mental effort required). note: this modifier should not be appended to an e/m service.
52 Reduced services: under certain circumstances a service or procedure is partially reduced or eliminated at the discretion of the physician or other qualified health care professional. under these circumstances the service provided can be identified by its usual procedure number and the addition of modifier 52, signifying that the service is reduced. this provides a means of reporting reduced services without disturbing the identification of the basic service. note: for hospital outpatient reporting of a previously scheduled procedure/service that is partially reduced or cancelled as a result of extenuating circumstances or those that threaten the well-being of the patient prior to or after administration of anesthesia, see modifiers 73 and 74 (see modifiers approved for asc hospital outpatient use).
54 Surgical care only: when 1 physician or other qualified health care professional performs a surgical procedure and another provides preoperative and/or postoperative management, surgical services may be identified by adding modifier 54 to the usual procedure number.
58 Staged or related procedure or service by the same physician or other qualified health care professional during the postoperative period: it may be necessary to indicate that the performance of a procedure or service during the postoperative period was: (a) planned or anticipated (staged); (b) more extensive than the original procedure; or (c) for therapy following a surgical procedure. this circumstance may be reported by adding modifier 58 to the staged or related procedure. note: for treatment of a problem that requires a return to the operating/procedure room (eg, unanticipated clinical condition), see modifier 78.
76 Repeat procedure or service by same physician or other qualified health care professional: it may be necessary to indicate that a procedure or service was repeated by the same physician or other qualified health care professional subsequent to the original procedure or service. this circumstance may be reported by adding modifier 76 to the repeated procedure or service. note: this modifier should not be appended to an e/m service.
78 Unplanned return to the operating/procedure room by the same physician or other qualified health care professional following initial procedure for a related procedure during the postoperative period: it may be necessary to indicate that another procedure was performed during the postoperative period of the initial procedure (unplanned procedure following initial procedure). when this procedure is related to the first, and requires the use of an operating/procedure room, it may be reported by adding modifier 78 to the related procedure. (for repeat procedures, see modifier 76.)
79 Unrelated procedure or service by the same physician or other qualified health care professional during the postoperative period: the individual may need to indicate that the performance of a procedure or service during the postoperative period was unrelated to the original procedure. this circumstance may be reported by using modifier 79. (for repeat procedures on the same day, see modifier 76.)
80 Assistant surgeon: surgical assistant services may be identified by adding modifier 80 to the usual procedure number(s).
82 Assistant surgeon (when qualified resident surgeon not available): the unavailability of a qualified resident surgeon is a prerequisite for use of modifier 82 appended to the usual procedure code number(s).
F1 Left hand, second digit
F2 Left hand, third digit
F3 Left hand, fourth digit
F4 Left hand, fifth digit
F5 Right hand, thumb
F6 Right hand, second digit
F7 Right hand, third digit
F8 Right hand, fourth digit
F9 Right hand, fifth digit
FA Left hand, thumb
GP Services delivered under an outpatient physical therapy plan of care
GY Item or service statutorily excluded, does not meet the definition of any medicare benefit or, for non-medicare insurers, is not a contract benefit
SG Ambulatory surgical center (asc) facility service
T1 Left foot, second digit
T2 Left foot, third digit
T3 Left foot, fourth digit
T4 Left foot, fifth digit
T5 Right foot, great toe
T6 Right foot, second digit
T7 Right foot, third digit
T8 Right foot, fourth digit
T9 Right foot, fifth digit
TA Left foot, great toe
XU Unusual non-overlapping service, the use of a service that is distinct because it does not overlap usual components of the main service
Date
Action
Notes
Pre-1990 Added Code added.
Code
Description
Code
Description
Code
Description
Code
Description
CasePilot

Get instant expert-level medical coding assistance.

Ask about:
CPT Codes Guidelines Modifiers Crosswalks NCCI Edits Compliance Medicare Coverage
Example: "What is CPT code 99213?" or "Guidelines for E/M services"