Coding Ahead
CasePilot
Medical Coding Assistant
Case2Code
Search and Code Lookup Tool
RedactPHI
HIPAA-Compliant PHI Redaction
DetectICD10CM
ICD-10-CM Code Detection
Log in Register free account
1 code page views remaining. Guest accounts are limited to 1 page view. Register free account to get 5 more views.
Log in Register free account

Official Description

Arthroscopy, ankle, surgical, excision of osteochondral defect of talus and/or tibia, including drilling of the defect

© Copyright 2025 American Medical Association. All rights reserved.

Common Language Description

Surgical arthroscopy of the ankle, as described by CPT® Code 29891, involves a minimally invasive procedure aimed at addressing osteochondral defects located on the talus and/or tibia. An osteochondral defect refers to a specific area of damage within a joint where both the cartilage and the underlying bone have been compromised. These defects are particularly prevalent in the ankle joint, often affecting the talus or tibia, which are critical components of the ankle's structure and function. The procedure is performed using an arthroscope, a specialized instrument that allows for visual inspection and intervention within the joint space. The surgical approach typically involves positioning the leg on an L-shaped bar to provide optimal access and stability, while the knee is flexed, allowing the lower leg to move freely. The ankle joint is then distracted to facilitate better visualization and access to the defect. Through a series of carefully executed steps, including the creation of portals for instrument access, the surgeon can effectively remove damaged tissue and prepare the site for healing. This procedure not only aims to alleviate pain and restore function but also promotes the regeneration of healthy bone and cartilage tissue through techniques such as drilling the defect to stimulate healing factors.

© Copyright 2025 Coding Ahead. All rights reserved.

1. Indications

Arthroscopy of the ankle, specifically for the excision of osteochondral defects of the talus and/or tibia, is indicated for patients presenting with the following conditions:

  • Osteochondral Defects Localized areas of damage to the cartilage and underlying bone in the ankle joint, typically seen on the talus or tibia.
  • Joint Pain Persistent pain in the ankle that may be associated with movement or weight-bearing activities.
  • Swelling and Inflammation Chronic swelling or inflammation in the ankle joint that does not respond to conservative treatment.
  • Limited Range of Motion Decreased mobility in the ankle joint due to structural damage or pain.
  • Failure of Conservative Treatment Patients who have not experienced relief from non-surgical interventions such as physical therapy, medication, or injections.

2. Procedure

The procedure for arthroscopy of the ankle with excision of an osteochondral defect involves several key steps:

  • Positioning The patient is positioned with the leg resting on an L-shaped bar, ensuring that the thigh is supported while the knee is bent. This positioning allows the lower leg to swing freely, facilitating access to the ankle joint.
  • Ankle Distraction The foot is secured in a bracelet, and the ankle joint is distracted to create space for the surgical instruments and improve visualization of the joint interior.
  • Joint Access A needle is inserted into the anteromedial aspect of the joint, and saline is injected to inflate the joint space. This step helps to distend the joint, making it easier to visualize the structures within.
  • Portal Creation After withdrawing the needle, an anteromedial portal is established for the insertion of the arthroscope. A trocar is placed in this portal, allowing the arthroscope to be introduced into the joint.
  • Joint Inspection The surgeon inspects the joint for any signs of injury, disease, or infection, focusing on locating the osteochondral defect.
  • Defect Removal An anterolateral portal is created to facilitate access to the defect. The surgeon then removes the damaged bone and cartilage fragment from the defect site.
  • Defect Drilling The bony defect is drilled using fine wires, a technique that promotes the release of growth factors and encourages the formation of new bone and fibrocartilage to fill the defect.
  • Joint Flushing The joint is flushed with saline to clear any debris resulting from the procedure, ensuring a clean environment for healing.
  • Closure Upon completion of the procedure, the arthroscope and surgical tools are removed, and the incisions made for the portals are closed appropriately.

3. Post-Procedure

After the arthroscopic procedure, patients can expect a recovery period that may involve rest, elevation of the ankle, and the application of ice to reduce swelling. Pain management may be necessary, and physical therapy is often recommended to restore strength and range of motion. Follow-up appointments will be scheduled to monitor healing and assess the need for further interventions. Patients should be advised on activity restrictions to prevent undue stress on the healing joint.

Short Descr ANKLE ARTHROSCOPY/SURGERY
Medium Descr ARTHRS ANKLE EXC OSTCHNDRL DFCT W/DRLG DFCT
Long Descr Arthroscopy, ankle, surgical, excision of osteochondral defect of talus and/or tibia, including drilling of the defect
Status Code Active Code
Global Days 090 - Major Surgery
PC/TC Indicator (26, TC) 0 - Physician Service Code
Multiple Procedures (51) 2 - Standard payment adjustment rules for multiple procedures apply.
Bilateral Surgery (50) 1 - 150% payment adjustment for bilateral procedures applies.
Physician Supervisions 09 - Concept does not apply.
Assistant Surgeon (80, 82) 2 - Payment restriction for assistants at surgery does not apply to this procedure...
Co-Surgeons (62) 0 - Co-surgeons not permitted for this procedure.
Team Surgery (66) 0 - Team surgeons not permitted for this procedure.
Diagnostic Imaging Family 99 - Concept Does Not Apply
APC Status Indicator Hospital Part B services paid through a comprehensive APC
ASC Payment Indicator Surgical procedure on ASC list in CY 2007; payment based on OPPS relative payment weight.
Type of Service (TOS) 2 - Surgery
Berenson-Eggers TOS (BETOS) P8A - Endoscopy - arthroscopy
MUE 1
CCS Clinical Classification 162 - Other OR therapeutic procedures on joints
22 Increased procedural services: when the work required to provide a service is substantially greater than typically required, it may be identified by adding modifier 22 to the usual procedure code. documentation must support the substantial additional work and the reason for the additional work (ie, increased intensity, time, technical difficulty of procedure, severity of patient's condition, physical and mental effort required). note: this modifier should not be appended to an e/m service.
50 Bilateral procedure: unless otherwise identified in the listings, bilateral procedures that are performed at the same session, should be identified by adding modifier 50 to the appropriate 5 digit code. note: this modifier should not be appended to designated "add-on" codes (see appendix d).
51 Multiple procedures: when multiple procedures, other than e/m services, physical medicine and rehabilitation services or provision of supplies (eg, vaccines), are performed at the same session by the same individual, the primary procedure or service may be reported as listed. the additional procedure(s) or service(s) may be identified by appending modifier 51 to the additional procedure or service code(s). note: this modifier should not be appended to designated "add-on" codes (see appendix d).
58 Staged or related procedure or service by the same physician or other qualified health care professional during the postoperative period: it may be necessary to indicate that the performance of a procedure or service during the postoperative period was: (a) planned or anticipated (staged); (b) more extensive than the original procedure; or (c) for therapy following a surgical procedure. this circumstance may be reported by adding modifier 58 to the staged or related procedure. note: for treatment of a problem that requires a return to the operating/procedure room (eg, unanticipated clinical condition), see modifier 78.
59 Distinct procedural service: under certain circumstances, it may be necessary to indicate that a procedure or service was distinct or independent from other non-e/m services performed on the same day. modifier 59 is used to identify procedures/services, other than e/m services, that are not normally reported together, but are appropriate under the circumstances. documentation must support a different session, different procedure or surgery, different site or organ system, separate incision/excision, separate lesion, or separate injury (or area of injury in extensive injuries) not ordinarily encountered or performed on the same day by the same individual. however, when another already established modifier is appropriate it should be used rather than modifier 59. only if no more descriptive modifier is available, and the use of modifier 59 best explains the circumstances, should modifier 59 be used. note: modifier 59 should not be appended to an e/m service. to report a separate and distinct e/m service with a non-e/m service performed on the same date, see modifier 25.
74 Discontinued out-patient hospital/ambulatory surgery center (asc) procedure after administration of anesthesia: due to extenuating circumstances or those that threaten the well being of the patient, the physician may terminate a surgical or diagnostic procedure after the administration of anesthesia (local, regional block(s), general) or after the procedure was started (incision made, intubation started, scope inserted, etc). under these circumstances, the procedure started but terminated can be reported by its usual procedure number and the addition of modifier 74. note: the elective cancellation of a service prior to the administration of anesthesia and/or surgical preparation of the patient should not be reported. for physician reporting of a discontinued procedure, see modifier 53.
78 Unplanned return to the operating/procedure room by the same physician or other qualified health care professional following initial procedure for a related procedure during the postoperative period: it may be necessary to indicate that another procedure was performed during the postoperative period of the initial procedure (unplanned procedure following initial procedure). when this procedure is related to the first, and requires the use of an operating/procedure room, it may be reported by adding modifier 78 to the related procedure. (for repeat procedures, see modifier 76.)
79 Unrelated procedure or service by the same physician or other qualified health care professional during the postoperative period: the individual may need to indicate that the performance of a procedure or service during the postoperative period was unrelated to the original procedure. this circumstance may be reported by using modifier 79. (for repeat procedures on the same day, see modifier 76.)
80 Assistant surgeon: surgical assistant services may be identified by adding modifier 80 to the usual procedure number(s).
81 Minimum assistant surgeon: minimum surgical assistant services are identified by adding modifier 81 to the usual procedure number.
82 Assistant surgeon (when qualified resident surgeon not available): the unavailability of a qualified resident surgeon is a prerequisite for use of modifier 82 appended to the usual procedure code number(s).
AS Physician assistant, nurse practitioner, or clinical nurse specialist services for assistant at surgery
GC This service has been performed in part by a resident under the direction of a teaching physician
GV Attending physician not employed or paid under arrangement by the patient's hospice provider
GW Service not related to the hospice patient's terminal condition
LT Left side (used to identify procedures performed on the left side of the body)
RT Right side (used to identify procedures performed on the right side of the body)
SG Ambulatory surgical center (asc) facility service
T5 Right foot, great toe
X4 Episodic/focused services: for reporting services by clinicians who provide focused care on particular types of treatment limited to a defined period and circumstance; the patient has a problem, acute or chronic, that will be treated with surgery, radiation, or some other type of generally time-limited intervention; reporting clinician service examples include but are not limited to, the orthopedic surgeon performing a knee replacement and seeing the patient through the postoperative period
XS Separate structure, a service that is distinct because it was performed on a separate organ/structure
XU Unusual non-overlapping service, the use of a service that is distinct because it does not overlap usual components of the main service
Date
Action
Notes
2005-01-01 Changed Code description changed.
1998-01-01 Added First appearance in code book in 1998.
Code
Description
Code
Description
Code
Description
Code
Description
Code
Description
CasePilot

Get instant expert-level medical coding assistance.

Ask about:
CPT Codes Guidelines Modifiers Crosswalks NCCI Edits Compliance Medicare Coverage
Example: "What is CPT code 99213?" or "Guidelines for E/M services"